Skip to main content

Posts

Showing posts from April, 2013

Random Video: Analog Modular Karussell! System by Schneiders Buero

Schneiders Buero (distribution, sales representative, general importer of various European synthesizer brands and products) from Berlin posted a nice video showing how random people react to a modular synthesizer.

Video: Analog Modular Karussell! System by Schneiders Buero.

" Take a look at the analog modular system by Schneiders Buro.
See people interact with that really cool modular synthesizer system wich turns 360° while operating.

Analog Modular Karussell! System by Schneiders Buero JoCognito"

Random Video: Cumulus 2 - The Bridge by Glitzerstrahl

Glitzerstrahl has uploaded the sequel in his Cumulus series of videos. (Find part 1 HERE /work in progress)
Interesting noises this time again, made with a great variety of Eurorack modules, find a full list at http://glitzerstrahl.com/the-modular/

Video: Cumulus 2 - The Bridge by Glitzerstrahl

" Part two in the tentatively named Cumulus series. Based entirely on the modular synth, with the exception of the kick drum. This track continues to explore the theme of sound textures started with the Cumulus 1, but this time with a higher tempo.
The track was recorded in multiple layers with the Morphing Terrarium as the primary sound source, except for some guest play from time to time by the Bubblesound VCOs. Only reverb was added as an effect while mixing the layers. There are no other computer generated effects.

Of course, all layers where recorded as continues 'live' recordings, each track 'over dubbing' the previous ones. The video was recorded in separate takes for e…

Using an A-115 For Complex Waveforms

The A-115 Divider module is very useful to create 'complex' layered basslines, and I use it a lot in my patches.

This module adds 4 separately mixable sub-octaves to your original signal, where F/2 = half the frequency = first sub-octave, F/4 = quarter frequency = second sub-octave, and so on...
Especially if you turn up the original oscillator source up a few octaves, you can get very nice results.

My latest PatchPourri video demonstrates a basic patch, where the original A-111 Oscillator (a square wave, driven by an MAQ16/3 Sequencer) is turned up 4 octaves before it is send into the A-115 Divider.
The A-115 can handle any kind of input waveform, but note that the 4 sub-octaves outputs are all true square waves, so the output provides 4 square waves plus the original signal.

Video: Using an A-115 for complex waveforms - PatchPourri IV by PatchPierre
" Short PatchPierre Tutorial
Equipment used: Doepfer A-100, Roland R8, Elektron Machinedrum "
Uploaded by PatchPierr…

Maxi Schaltwerk

It's weird that i haven't posted any video's of the original Doepfer Schaltwerk sequencer (introduced in 1997) on my blog yet.
After the recent announcement of the upcoming A-157 (or Mini Schaltwerk),
I thought it would be interesting enough to look up more info about the Schaltwerk and share it with you. It will take some time, but I will post more about it in future blogposts, so here is just a teaser, uploaded 2 years ago by popitem

Video: Doepfer Schaltwerk quick demo
" 3 tracks sequencing a modular synth with cv / gate5 tracks sequencing a midi drum modul (mfb kult)" uploaded by popitem

As you see there are many differences between the original Schaltwerk and the new A-157/Dark Flow modules. Besides the size, the main thing is that the new modules will only sequence triggers, and no note/pitch info. That's why i think it will be mainly used for triggering drum-sounds with it, that can ultimately result in very complex rhythms once the A-157-4 controller …

Doepfer MAQ16/3 Versions

This year Doepfer is celebrating the 20th birthday of the MAQ16/3 MIDI Analog Sequencer with a special 'Dark Edition'

The original version of the MAQ was designed in cooperation with the German band Kraftwerk 20 years ago, and is used by many famous musicians like Human League, Jean-Michel Jarre, Klaus Schulze and many more.

These sequencers are best known in Doepfer's silver-grey color, but this new Dark Edition is not the first black MAQ sequencer that they sold.
In fact there were a few different versions that gradually evolved into the current version.
The first MAQs for example, only had 8 presets, no CV/Gate outputs, and a potentio-meter instead of a rotary encoder for data input.
An overview of the most important innovations of the current version 3.xx compared to the older versions 1.xx and 2.xx:
- CV and Gate output for each row (not on the original version) - 30 preset memories (instead of 8 only) - Editing feature of all preset data (not only the running paramete…

Using an A-118 to Liven Up A Bassline (Look, No Hands)

One of the main problems that I have when performing live with a modular synth is that i only have two hands.
This new PatchPourri post shows an example how to simply  'automate' a filter with an A-118 Noise/Random Voltage module.
This can add a nice random effect to your basslines, with the right settings, and might be useful in live situations where you can't pay attention to everything.

I don't use the Noise audio-outputs of the A-118 Noise/Random Voltages a lot, but i love using the random outputs of this module.
(I even added a 2nd Random output to this module a few weeks ago - find my blog-post about it HERE)

The patch goes as follows;
A sequence on the MAQ16/3 controls an A-111 VCO sawtooth that goes into an A-121 Multimode filter
A-118 RND output controls the Filter cutoff, the other (copied) A-118 RND output controls the Resonance.
I added an envelope to the A-121 CV2-input to make it a little bit more punchy.

No edits or effects... no hands (just watch the LE…

Deep Inside The Doepfer Booth at MusikMesse

Ah... the first pictures and videos from the Doepfer/Alex4 booth at MusikMesse are popping up on the internet.
This first one, from http://stereoklang.se/blog/ (@steelberryclone on Twitter) shows the inside of the Alex4 booth with a glipse of their new products... 
Video 1: Deep inside the Doepfer booth at MusikMesse

" A quick tour of all the modular stuff you will find in the realms of Doepfer
Nice and bleepy with loads of modules and flashing lights
Get all your electronic music news first here at Steelberry Clones http://stereoklang.se/blog
SBCLive@MusikMesse2013 " Source: http://stereoklang.se/blog/deep-inside-the-doepfer-booth-at-musikmesse
The next video, from CDMblogs / CDMTV shows a little more of new A-157 Trigger sequencer.
Video 2: Doepfer Sequencers at Musikmesse

" Impressions from the ALEX4 booth, modular sequencers, sequencing. "
Tipped by FSK1138 from http://www.modulargrid.net/
SonicState gives a nice overview of the whole Alex4-booth in the next 2 …

Doepfer A-127 VCRF Re-Design

I almost missed this between all Doepfer's other MusikMesse announcements;
As of April 2013 the Voltage Controlled Resonance Filter A-127 is available in an improved version.
Instead of the CA3080 chip (not available anymore) that was used in the original versions, new high-end circuits (SSM2164) are now used.

"The SSM2164 chip contains four independent voltage controlled amplifiers (VCAs) in a single package. High performance (100 dB dynamic range, 0.02% THD) is provided at a very low cost-per-VCA, resulting in excellent value for cost sensitive gain control applications.
Each VCA offers current input and output for maximum design flexibility, and a ground referenced -33 mV/dB control port."

This is probably the Doepfer filter that i use the most, and the brand new re-design also promises to reduces the noise floor and the distortion clearly, according to Doepfer.
(The noise that i never really noticed before...)

The price of the new A-127 VCRF remains unchanged.

Check o…

Doepfer Monster Base Unpacking Video by Raul Pena

Video: Doepfer Monster Base Unpacking
" A short unpacking video of my new Doepfer Monster Base.My subscribers will like to know there will be a change of scenery soon. I though this an appropriate way to let them in on the secret. ;). Sound and Video by Raul Pena." Uploaded by Raul Pena

Custom Wooden Side-panels For Your Synth

I did spend a few words on the wooden side-panels for the Dark Energy / Dark Time that i had seen online more than a year ago.
Until now i had little info on them, but now i have a little bit more.

The side-panels are made and sold by Howard, who is calling himself Synthfan73 on eBay UK
He makes and sells these custom made wooden side-panels for all kinds of desktop synths like the Dark Energy (1 and 2), Dark Time, Moog Minitaur, Access Virus b, Waldorf Q(+)
He also created wooden panels for the Clavia Nord Lead Desktop 1 / 2 / 2x, Vermona Mono Lancet and Novation Nova. (see video)

In my opinion they look great and perhaps they are ergonomic too.
If i only had one of these 'Dark' instruments i would definitely try them out.

Due to popular requests, he makes the Dark Energy panels in dark Saple Mahogany wood.
They are coated in Danish finish and fit both Dark Energy and Dark Time and can be found on Ebay UK under 'Doepfer Dark Energy.
£29.99 a set. (+ postage)
Video: Doepfe…

Doepfer A-121 Multimode Filter Tutorial Videos by Raul Pena

As promised, a new series of Raul Pena's excellent tutorial videos has started today.
This time Raul digs deep into, and explains all about one of my favorite filters, the Doepfer A-121 Multimode Filter.

Video 1: Doepfer A121 Multimode Filter Basics

" A brief look at the Doepfer A121 Multimode Filter. Basic Features and functions are discussed.
Audio demonstrations in the next video in the series.
Sound and Video by Raul Pena."

Video 2: Doepfer A121 Multimode Filter Low and High pass Filters Demonstration

" A brief look at the Doepfer A121 Multimode Filter.
Audio demonstrations of the Doepfer A121 Multimode filters.
A specific look at the Low and High Pass Filters. Next video in series looks at the Band Pass and Notch filters.
Sound and Video by Raul Pena."

Video 3: Doepfer A121 Multimode Filter- Band Pass and Notch filters Demonstration

" A brief look at the Doepfer A121 Multimode Filter. Audio demonstrations of the Doepfer A121 Multimode filters. A speci…

Doepfer MAQ16/3 Already Maxed Out

The announcement of the re-issued MAQ16/3 Dark Edition has been warmly welcomed by most people.
It has also triggered the obvious MAQ-update questions again.
Although i am very happy with my MAQ16/3 MIDI Analog Sequencer, i agree that there are still many points for improvements in my, and other people's opinion. The main issue that i have with the MAQ is basically the limited number of only 30 presets/memories. It could also help if it had different scale settings, shuffle control and a bigger display for example.
Sadly the new MAQ Dark Edition will not bring any changes in that...
Back in 2005, Doepfer explained how they already maxed out the capacity of the original MAQ hardware design.

" We discussed several times a "MAQ16/3 Mark II".
The main reason why we did not develop a new sequencer so far (2005) is because we wanted to offer the possibility to upgrade older devices (as for the CV/Gate output
addition from version 3.0).
Most of the suggested improvements w…

Using an A-174-1 Joystick for WobWob

I'm not sure how to name my latest collection of short basic tutorials yet, but i am considering the name "PatchPourri" for this weird collection of short basic patch-ideas.

My latest video shows how you can simply use an A-174-1 Joystick for dubstep-like effects.
The idea comes partly from blogpost i wrote about Dmitry Shtatnov's DIY-fader, but i used this patch before on several other occasions.

In the video a 2-note sequence from the MAQ16/3 controls a standard A-110 VCO.
I connected the X-output from the joystick module to the CV input of a VCA, and the Y-output controls an A-121 Filter (lowpass mode). Very simple, very basic... off course you can expand this in all kinds of ways. Have fun experimenting!
Video: Using an A-174-1 Joystick for WobWob by PatchPierre

" Short PatchPierre Tutorial
Equipment used: Doepfer A-100, Roland TB-303, Machinedrum "

Uploaded by PatchPierre (subscribe!)

Read how i removed the spring from the x-axis of the A-174 Joystick …