Showing posts with label 12dB/Oct. Show all posts
Showing posts with label 12dB/Oct. Show all posts

Friday, October 24, 2014

Analogue Solutions Telemark Multimode Filter

Analogue Solutions just released their Telemark Multimode Filter module, a eurorack module based on the Telemark multimode filter.

The Telemark multimode filter module is based on the filter of the legendary Telemark semi-modular synthesizer.
It's routes lie in the original 1970s Oberheim SEM, though it has developed a character of its own.
The filter is a 12db/Octave multimode type. Multimode means there are more than one type of filter output.
There are in fact four: low pass, band pass, high pass and notch filter.
Additionally, notch filter can be varied for an even wider range of sounds.
Use of Gain and Q allow for even wider possibilities.
No special knowledge is required to use this filter. Just plug your audio in the left, and your audio out on the right.
Optionally (and recommended!) patch a control voltage in to give the sound movement.

KEY FEATURES OF TMF
- Pure analogue circuitry.
- Telemark filter
- 4 filter types- Low, High, Band, Notch
- Resonance (Q) boost feature
- Slim design
- Spun metal knob caps

DivKid made another great video demonstrating the module;

Video: Analogue Solutions TMF - Telemark Multimode Filter eurorack module video overview

" New eurorack module - a multimode filter based on the stand alone synth Telemark, from Analogue Solutions.
Video by Ben Wilson / DivKid - www.youtube.com/divkidvideo"

Friday, May 27, 2011

Filters III : A-124 Wasp Filter

The A-124 is a special 12dB multimode filter using the filter circuit of the EDP Wasp, a monophonic black and yellow analog synthesizer, that was built around the end of the seventies and manufactured by the UK company Electronic Dream Plant.

I totally love the sound of the A-124 Wasp Filter module. It does have it's own special sound due to the special circuits in it which makes the module sound a little dirty and distorted. This can sound very nice with extreme filtersweeps, i often control the cut-off frequency with the pressure CV from the A-198 Ribbon Controller.

The module has 2 audio outputs; a band-pass and a combined low/notch/high pass output that can be controlled with the 'mix' knob that defines the relative amounts of low and high pass signals.
( middle position is notch )

One downside of the module is the lack of a QCV input like most A-100 filters have, so sadly the Resonance cannot be controlled via an external voltage. You can only adjust this manually.
It would have been nice if the Mix could also be controlled by CV...   IMHO

Out of the box this filter can't go into self oscillation, in contrast to most of the other filters in the A-100 system, but modifying  for self-oscillation is quite easy;
Soldering a 10k resistor in parallel to R13 (27k) leads to self-oscillation of the filter at the max. resonance setting of the resonance control.*

 More info on this modification can be found HERE

Wednesday, March 16, 2011

Filters II : A-121 VCF2 Multimode Filter

The first Doepfer filter that i ever bought was the A-121 Multimode Filter. It is a 12 dB/Octave filter, and has multiple simultaneous outputs available; a Low-Pass, Band-Pass, High-Pass and Notch (or Band Reject).
It also has 4 CV inputs, 2 for adjusting the cutoff frequency and 2 for resonance.

This is still one of my favorite filter modules, the multiple outputs are very useful, and i  like all the CV inputs. It just gives you so much more control over the filter, and that's what i like most in a module; maximum control.

Although it is 'only' a 12 dB filter it sounds very nice, from very smooth and warm up to quite rough, especially with the resonance turned up ( ...up to self-oscillation ).
Most of the times i patch an A-174-2 Wheels CV into FCV1, and a simple envelope CV to the (adjustable) FCV2. Works fine in most situations.
With some analog or digital noise added to QCV2 to give it a touch of unpredictable resonance you will quickly get a convincing fat bassline.

Together with an A-138 B (exp) Mixer you can easily make some pretty impressive stacked bass-sounds, all with just a single filter-module.

Find A-121 sound examples at Andreas Krebs Blog : HERE

As the special circuit CEM3320 used in this module is no longer available the module is discontinued. I believe there are still a few available, but they don't make new ones anymore. Doepfer advices modules like the A-106-6 ( with eight simultaneous outputs! ) or A-107 Multi-Type Morphing Filter as a replacement.

Sunday, February 27, 2011

A-101-2 Vactrol Low Pass Gate

I must say i am very happy with my latest module, the A-101-2 Vactrol Low Pass Gate.
This module is a combination of a 12dB Low-Pass Filter and a Voltage Controlled Amplifier (VCA), with 2 vactrols as controlling elements with very unique characteristics and is very popular amongst the members of the Doepfer A-100 Yahoo Users Group.

The module is based on the Buchla Model 292 Quad Voltage-Controlled Lopass Gate module. '
The term "Low Pass Gate" was first used by Don Buchla for a module that can be switched between Low-Pass and VCA.
Buchla's current (2004) update is the Model 292e Quad Dynamics Manager ,that is functionally identical to the older model, but includes some extra functions like velocity inputs, allowing controllers to control note volumes with performance gestures and preset storage.

Doepfer's LPG module can handle 2 different incoming control voltages that can be used to control the Low-Pass filter, or to open or close the VCA.
Additionally a combined mode LP + VCA is available which makes the sound more dull as the loudness decreases. This is characteristic of all acoustic instruments (the harder you strike, pluck, or bow, the richer the overtone structure), but had been lacking in electronic instrumentation before..

In contrast to the Buchla design the A-101-2 offers attenuators for both CV and audio input, a manual resonance control and two gate inputs to control the function of the module in addition to the manual toggle switch.
The filter is hard to describe, but vactrols are known for their smooth sound behavior. Compared to a 'normal' 12 dB filter like the Low-Pass filter from the A-121, they sound quite the same, but the Vactrol inside the A-101-2 does give it a smoother edge that can perhaps best be compared with a very subtle 'slew' effect. The VCA has that same 'slewy' characteristic, but doesn't sound dramatically different than a regular VCA to my ears.

The combination of the LPG and VCA, is (obviously) my favorite setting and with the resonance up this module really starts to shine. ( Resonance is adjustable all the way up to self-oscillation )
A nice extra are the 2 Gate inputs, that can make you ( rhythmically ) switch between the two functions of the module with an external sequencer or other triggers. I'm not sure if 2 Gate inputs was necessary though.., personally i had rather seen an extra CV input for the Resonance (QCV) for example.
(Perhaps this can be modified?)

Overall this is a very nice-sounding module, that i will use a lot in the near future. I'm not sure if i put it in my top-5 list of favorite modules, but it will at least be in my top 10 for the next few months.

- Check my earlier Vactrol Basics post for more general details about vactrols,
or take a  look at Doepfer's Vactrol Basics page.
More about the A-101-2 LPG  including an audio example at Andreas Krebs blog

Saturday, November 20, 2010

Filters I : A-127 Triple Voltage Controlled Resonance Filter


It is hard to say what my favorite A-100 filter is. Every filter has its own distinctive sound, and they all have a lot of Control Voltage input possibilities. I must admit i prefer low-pass filters... and filters with many outputs.

The A-127 VC Triple Resonance Filter is 3 bandpass-filters in one, each with its own LFO (sine) with adjustable frequency. The module has 3 individually adjustable outputs plus a mix output, and with all the controls for filter frequency and resonance it is a very flexible module.
\All 3 filters have an external CV input too, that by-passes the LFO when a plug is inserted in the socket. The amount of incoming CV's can be attenuated with a knob.

I love the sound of it, one of the characteristics of the 12 dB/Octave filters is that it can produce almost vowel-like sounds.
The LFO's can create amazing filter-sweeps as well with the frequency-rate adjuster.
As modulation inputs various CV's can be used like ADSR's and other LFO's (triangle/saw/rev saw).
Inputting voltages from any Wheel, Joystick or Theremin modules are also awesome ways to control this massive module.

You can even turn this module into a Triple Low-Pass Filter by changing internal jumpers, another nice feature. It might not be my most favorite filter of all, but this one is still the most-used filter that i own at the moment...