New Doepfer Announcements

Doepfer released preliminary information about two new modules.

The A-190-8 is a MIDI/USB to Sync interface.
Basically this module divides the incoming MIDI or USB clock messages into smaller steps.
You could see it as a modular version of the MSY2 MIDI-to-SYNC Converter that was announced in December last year, but with multiple simultaneous outputs and added USB support.
Funny that i already posted my idea for a module like this in late 2010 (Read that blogpost HERE)

A-190-8 Prototype 1

The main application of the module is the control of clocked A-100 modules like sequencers, sequencer controllers, trigger divider, trigger sequencer and similar units, but also to trigger/reset LFO's, envelope generators and more.

The A-190-8 will have 10 available outputs which are not yet fixed. 

Preliminary info can be found HERE, and if the users think other combinations of clocks or start/stop/reset outputs would be better, Doepfer can change that because the outputs are generated by the firmware of the processor.

Read some of the user suggestions at the Doepfer Yahoo Usergroup.

Doepfer left out the usual DIN SYNC socket because to create that you only need clock and start/stop on two pins of the DIN socket. 

If there are sufficient inquiries Doepfer may offer a special cable with two 3.5 jack plugs on one side and a DIN plug on the other. 

(For example to synchronize a TB-303)

A-180 Multiples and
a 2 HP blindplate,
the size of
the new A-180-2

For early in 2013 also a slim version of the A-180 Multiples module is planned.

This will be called A-180-2 and will be half the size of a regular A-180.

Because of the only 2 HP width nuts cannot be used to mount the pc board by means of the socket nuts at the front panel. 

Instead of that the PC board is mounted by screws and spacers at the front panel.(pic)

Personally i don't think i want one of those in my system because of how a nut-less module looks, but i can imagine there are people who applaud space-saving modules like this.

There were also a few other announcements/updates:
In December the A-192-2 (Dual CV/Gate-to-USB/Midi interface) will be available and even the hardware of the Polyphonic CV/Gate interface A-190-5 is ready.
"Christian (Assall) is about to program the firmware. But it takes longer than expected  and so the A-190-5 will be available early in 2013."

Special thanks to Bakis Sirros in the Doepfer Usergroup for sharing parts of this info.
Bakis can be found via multiple ways, support him and his band(s) to help the Greece economy a bit:

www.parallel-worlds-music.com
www.facebook.com/pages/Parallel-Worlds/192093934136476
www.myspace.com/interconnectedmusic
www.myspace.com/memorygeist
www.DiN.org.uk
www.vu-us.com

Doepfer USB/CV/Gate/MIDI Converters Update

A little bit more info (by Dieter himself) on two upcoming Doepfer modules popped up in the Yahoo Doepfer Usergroup today.

It said that the A-192-2 Dual CV/Gate-to-MIDI/USB Interface is in the starting blocks and will be included with the next (fall 2012) production series.
Module A-192-2 contains two independent CV/Gate-to-Midi/USB interfaces.
Another product that almost reached the production stage is the A-190-5 four voice polyphonic Midi to CV/Gate interface that will probably be included in the last production series in 2012.

The A-190-5 will have 12 CV and 4 Gate outputs, and different modes (e.g. unisono, four-fold monophonic, different four voice polyphonic modes)
The hardware of the A-190-5 module is ready and Christian is working on the firmware.
Though it was planned to use 12 bit DA converters Doepfer thinks about 8 bit converters to reduce the price a bit.
"12 bit converters don't seem to have any advantage because the module only converts 7 bit midi data into CV (no software LFOs or software envelopes or software glide) and in this case 12 bit DACs

are wasted money because the last 5 bits are not used.", according to Dieter.

The estimated price for the A-192-2 is approximately 130 Euro, expect to pay around 300 Euro for the A-190-5.
Price and release date are still without obligation

Find the latest updates on new Doepfer modules HERE

Future Modules Update

Last week, Dieter Doepfer took the time to answer some questions in the Yahoo Doepfer A-100 Usergroup on the state of the new modules that will be released this year. I did mention most of them earlier, so no big news this time, but some really informative background info.

About the A-190-5 (four voice polyphonic Midi to CV/Gate interface):
" The new A-190-5 prototype (version with LC display) is on my table since a couple of months. But we did not continue because of some more important projects (e.g. Dark Time, Dark Energy II). I think we will be able to finish the hardware until summer (end of summer is in September :-) but I don't think that the final firmware with all planned modes will ready at that time. But we plan to add the firmware update feature via the USB interface."

Doepfer A-157 Trigger Sequencer, as shown at
MusikMesse 2012. Picture by @Cymatics

A-157 Trigger Sequencer -update:
" We are working on the A-157 right now. The new button/LED board with 16x8 is already made and tested. But we are about to redesign the control board as we determined that the microcontroller used in the first prototype (the pictures with the 8x8 board) is not powerful enough for all planned features. In addition the manufacturer announced the discontinuation of the chip. So it will still take some time until the module is ready."

He continued:
" I hope that these 3 new modules will available during this year: A-192-2 /CV/Gate-to-Midi/USB converter), A-190-5 (polyphonic USB/Midi-to-CV/Gate interface), A-157-1 (16x8 LED/button board with 8 trigger outputs), A-157-2 (control board #1 for A-157-1).
But I'm not sure about the order of the release dates.
Probably the A-192-2 will be the first one as the development is nearly finished (we have to built one more prototype and hope it will be the last one).

We (also) think about a "real" ASR (analog shift register) module because the A-152 cannot be used as ASR in all applications.
But this has no priority at the moment and is not yet mentioned in our list of planned modules."

Note: Please don't call or mail them too often at Doepfer about release-dates or updates of future modules. The Doepfer website is updated very regularly, so you will find all the latest info THERE...