Quick Tip XIII : Improvised Multiples

The bigger your Eurorack gets, the more often you need longer cables.
In case you don't have enough long cables, i would advice you to put an A-180(-2) Multiples module somewhere in the middle of your system so you can extend your cable-reach from there.

A-164-1 as
improvised
Multiple

If you don't have enough multiple modules, you can also look if you have other options.

A-165 Trigger
Modifier Inputs

You should know that some Doepfer modules have multiple in- or outputs that are interconnected in a way that they can act as multiples as well...

You can recognize these in/outputs by the connected line between the mini-jacks.
The A-175 Voltage Inverter  and A-165 Trigger Modifier  are nice examples,  both have two separate channels, so also two multiples.
The A-164-1 Manual Gate module can even be used as 3 separate multiples.
The 2 outputs on the A-119 External Input module are connected together too, as well as the audio inputs on the A-126 Voltage Controlled Frequency Shifter.

A few more Doepfer modules also have this option, let me know in the comments if you find other modules that have this possibility.

This 'trick' works for CV signals and for audio but I should mention that if you use these modules as an improvised Multiple, most of the times you cannot use the module's original functions at the same time.

Busboard Access

Updated August 25th 2011

A good patch can sometimes turn out to a whole spaghetti of patchcables.
Luckily Doepfer provided the A-100 system with a subsystem that makes the routing of some Gate and CV signals through the internal busboard-system possible.

It's too bad that not all modules have this ability, but for some modules this is a good way to avoid "over-wiring" your system with patch-cables.

Only modules A-110 (Standard VCO), A-111 (High end VCO), A-111-5 (Mini Synth. Voice), A-140 (ADSR), A-164-1 (Manual Gate), A-185-1 (Bus Access), A-185-2 (Precision Adder) and A-190-1,2,3 and 4 (Midi Interfaces) have access to the CV or Gate signal of the A-100 busboard.

The A-164-1, A-185 (-1 and 2) and A-190 (-1,2 and 3) can be used to "write" the busboard, i.e. they can output the signals to the bus.

The others are able to "read" the busboard, i.e. they pick up the signals CV (A-110, A-111, A111-5) resp. Gate (A-140, A-164-1) from the bus.
The A-111-5 can pick up CV and Gate from the bus. Also the planned A-143-4 Quad VCLFO/VCO will be able to read the A-100's busboard.
For details please refer to the user manuals of these Doepfer modules.

Most of the modules come with jumpers inside that can connect or disconnect the signal from and to the busboard. If other modules should be able to "write" or "read" the bus some of them can be modified. More on this in a future modding blogpost.

Doepfer warns on their DIY-site for shortcircuiting modules and/or busboard, so please take note:
Pay attention that only one module is allowed to "write" to the same bus signal.  If two or more modules write to the bus this leads to a short circuit of the corresponding outputs.
Please let me know if i forgot some modules in the Feedback section of this post, thank you!

A-164-1 Manual Gate

I love hands-on control over my Doepfer A-100 Sytem:
I simply love my Ribbon Controller, the Joystick, Wheels and Theremin Modules, and this one is also one of my favorites.

Perfect for manual ( one-shot ) triggers is the A-164-1 Manual Gate Module.

This module has 3 seperate trigger-buttons that generate a 12V voltage at their respective Gate outputs when pushed. On release no voltage is sent.

All 3 Buttons have double outputs for even more flexability and functionality, and Gate/Button 1 can also be controlled by an external signal ( e.g. the rectangle output of an LFO ),  what makes button 1 act like a momentary on/off switch. This can add some nice ( rhythmic ) effect to your patch.

I prefer to use this module as a manual trigger for self-made one-shot sounds like cowbell sounds or other weird electronic (drum-) sounds. ( Pjoewwww)
In these patches i mainly use the buttons to trigger one or more ASDR's or envelope generators

Another interesting application for this module is extreme filtering...
Because the output of each  Gate is 12 V, feeding this voltage into a CV input of a filter ( or it's resonance control ) will lead to an abrubt ( and full! ) opening and closing of the filter at the push of a button.

As with almost all A-100 Modules, possibillities are limitless.
Leave a comment if you have more interesting and/or creative use for this module.