Doepfer A-138p/o Performance Mixer Combo

The latest addition to my modular system is the A-138p/o Performance Mixer set of modules...

Modules A-138p/o are a simple performance mixer that I use as and end-mixer for all the signals coming out of my A-100, and for merging my TB-303 audio, before it all goes into my mixing-desk.

Module A-138p is the 4-fold input module, A-138o is the output module that can be combined with one or more A-138p.
I read somewhere that the module didn't start off as commercial product, but as a personal hobby-project of Dieter Doepfer who just needed this module for himself... It did go through quite a few prototype stages before it was released in this final form.

The A-138p has 4 input channels, with separate controls and a mute
switch for each channel.

A-138p/o in my current setup, with
the aux send/return patched through
the Qu-Bit RT-60 DSF Multi fx

The controls are for Gain (control to adapt different audio levels -also for external signals), Level (the main volume control), Aux and Panning
An internal jumper for each channel lets you choose between Aux pre/post main Level control.
There is an internal connection to the output module and to other A-138p modules
The A-138p requires the A-138o Output module (no stand-alone use)

The A-138o Output module features level controls for Left, Right and Aux,  and output sockets for Left, Right and Aux (3.5 mm mono sockets), it requires at least one A-138p (no stand-alone use)

I must say that I am extremely happy with these new modules. It's just what I needed to create an easier workflow in my system.
I especially like the Aux send/return function, which makes it a perfect companion for my Qu-Bit RT-60 DSP multi-effects module, but you can also use it for sending audio to a BBD-module, a filter or spring reverb for example.
Alternatively the Aux send can be used for pre-listening in combination with a headphone.
Like any other Doepfer module this one is easy to use too, the controls are very basic and straightforward. These modules are now the heart of my A-100 system.

About a week after I ordered mine, the word got out that Doepfer was working on another version of this module (A-135A/B/C) with dedicated CV inputs for each parameter and a Quad Envelope follower module with attack and release controls for each of the 4 channels.
Some prototypes of these modules are already touring through the world, I did see one in the Alex4 rack at the Amsterdam Dance Event in October of last year.
You can read more about that in my next blogpost, but I must say it looks promising.
At the moment I don't really need such a module or have the HP space for all of them. but I do see some exciting possibilities in these modules.

Source: http://www.doepfer.de/home_e.htm

Doepfer A-127 BOM Filter Breakout Module Announced

Doepfer finally announced a few new modules for this year.
The first one is an expander-module for the A-127 Triple Voltage Controlled Resonance Filter, which has always been my favorite Doepfer filter...

Basically they took advantage of all the filter outputs that were already available in the original A-127 module, but not made available on the frontpanel.

I wrote about how i made my own A-127-expansion-board a few years ago in this blog, but this official board takes it to the next level, with even one more filter and separate audio outputs.

A-127 BOM Filter
Breakout Module

" For early summer 2014 the A-127 breakout module is planned.

This expansion module offers these new functions:
- additional notch filter for each sub-unit
- separate outputs for lowpass, highpass, bandpass and notch for each sub-unit
- separate audio input with attenuator for each sub-unit

The breakout module allows the separate use of each of the three A-127 filters.
In addition the filters can be patched parallel or serial.
Especially the serial connection of three notches generates very complex phasing-like structures.
For parallel filter connection the existing mixer of the main module may be used or an external mixer.
For serial connection the filters are patched in the desired sequence at the breakout module.
A jumper is used to define the filter type for each sub-unit for the mix unit of the main module.

Remark:
The breakout module can be used without modification only in combination with the new version of the A-127 (pcb printing "Version 4").
Only the new version has the expansion connector available, that is required to connect the breakout module.
It's also possible to combine the breakout module with older versions of the A-127 (versions 1, 2 and 3) but in this case soldering is required to connect the breakout module to the main module (soldering 4 wires to each filter unit).

We will publish corresponding modification instructions as soon as the breakout module will be available."

You can still find my own A-127 DIY-expander blogposts via http://patchpierre.blogspot.nl/2010/12/modifications-ii-127-triple-resonance.html

Source: http://www.doepfer.de/a127.htm

The new Doepfer modules will be shown at #MusikMesse in the booth of their distributor Alex4 in hall 5.1, booth nr. C54

Update May 23 2014: " The A-127 BOM is already in production and should be available July 2014."