Doepfer NAMM 2018 A-100 Polyphonic Module Announcements

Right in time for the upcoming NAMM exhibition later this week (January 25/28 2018, Anaheim, Hall A, booth 10706), Doepfer announced a few more interesting A-100 modules (next to the Dark Energy III news). Too many new modules for one blogpost, so I had to split it up into multiple blogposts... The next one will contain their new 'standard' modules.

The magic word for Doepfer this year seems to be Polyphony, because most of the new products are perfect companions for the highly anticipated A-190-5 Polyphonic CV/Gate Interface, a module that has been in pre-production for a loooong while now. 

On the Doepfer website we can still read the message We cannot yet specify a definite release date but hope that it will be available in 2011, from the early prototype stages.

We already know most of its features, i have been blogging about it since 2011, but here are the details once more:

A-190-5 is a Midi/USB interface that generates 4 gate signals and 12 control voltages to control up to four synthesizer voices (i.e. VCOs and associated modules like envelope generators, VCFs and VCAs) for polyphonic sound generation. 

The A-190-5 will be equipped with different polyphonic, duophonic, paraphonic and monophonic modes which are selected by means of menu buttons and the display.
For each channel a gate, a note controlled CV (1V/Oct.) and two auxiliary CVs (e.g. for velocity or controlled by midi control change messages) are available. In play mode the states of the four gates are displayed by four LEDs integrated into the buttons 1-4.
Firmware updates are possible via USB.

The A-111-4 Quad Precision VCO will be available soon too... adding 4 wide-range precision-VCOs to complement the Polyphonic module and was already announced at Superbooth 2017. Read all about this at http://patchpierre.blogspot.nl/2017/04/superbooth-2017-new-doepfer-module.html

A-105-4

Brandnew is the A-105-4 Quad SSM VCF filtermodule, their first polyphonic filter and contains four identical 24dB Lowpass filters (SSM2044 type).
The special feature of the 4 pole low pass SSM2044 is the patented so-called "true open loop design that delivers a characteristic fat sound not available from other devices"

This chip was used e.g. in these synths: Korg Polysix, Korg Mono/Poly, Fairlight II, PPG Wave 2.2 und 2.3, Emu SP-1200, Siel KIWI,  DK600, Siel Opera 6, and the Simmons SDS5.

The first Prophets 5s used the SSM2040 - the precedessor of the 2044 - that generates a very similar sound. (source)  Version 3 of the Prophet 5 switched to the thinner sounding Curtis CEM3320. The Pro One also used that chip.

It has available common manual controls and CV inputs with attenuators for these parameters:
• Frequency (F)
• Frequency Modulation Intensity (FM)
• Resonance (Q)
• Audio Input Level (L)

Each filter has available a separate FM input as well as an Audio Input and Output. The FM input is typically connected to the output of the associated envelope
generator (e.g. A-141-4). The envelope amount for all four filters is controlled by the FM knob and the CVFM input by means of four built-in VCAs, which are controlled by the FM control and CVFM input.

A-132-8

This allows also voltage control of the envelope amounts. In addition common frequency modulation for all filters is possible (e.g. by an LFO). For this the CVF input with attenuator can be used.
The range of the audio input level control (L) allows also clipping/distortion with typical A-100 audio levels (e.g. from A-111-4) at the filter inputs.
Even this parameter is voltage controllable as well as the resonance (Q).
Application: polyphonic patches (four VCFs with same parameters)

Another new Polyphonic module is the A-132-8 Octal VCA:
The A-132-8 contains four VCA pairs. Each pair includes two daisy-chained VCAs. One VCA has a linear control scale, for the second VCA linear or exponential control scale can be chosen by means of jumpers.
Doepfer decided to provide two VCAs for each voice because usually one VCA is required for loudness envelope and a second one for velocity (or another function).
For each VCA these in/outputs are available:

A-141-4

• CV Input VCA 1
• CV Input VCA 2
• Audio Input
• Audio Output
Audio Sum Output is also available.
The module features two Initial Gain controls, that enable the opening of the first (G1) and/or second VCA (G2). This is necessary when the VCA in question is not in use (i.e. no external CV available). Otherwise the VCA would close. They are also useful for testing polyphonic patches.
Application: Polyphonic patches with two VCAs per voice.

The A-141-4 Quad Poly VCADSR contains four ADSR type voltage controlled envelope generators with common manual controls and CV inputs with polarizers for the parameters Attack (A), Decay (D), Sustain (S) and Release (R).

Each of the four envelope generators has available a gate input, a control LED and an envelope output.
Application: Polyphonic patches (four envelope generators with the same envelope parameters to control four VCFs, VCAs or other modules)

Source: Doepfer NAMM 2018 PDF

Doepfer A-190-5 Polyphonic USB/MIDI-to-CV/Gate Interface Preliminary Info

Planned to be released in the fall of 2013*,  so more and more details keep popping up on the internet about the A-190-5 four voice Polyphonic Midi to CV/Gate interface.

The prototype of this module already been displayed at MusikMesse 2013 and at Dieter´s latest workshop in Munich, Germany last month.

The first design of the
A-190-5 (then A-190-3)

To keep the price low, the first design of the A-190-5 was based on Doepfer's  MTV16 Midi-to-Voltage Interface with 16 Analog Voltage Outputs ( an OEM/DIY product that is still available)
The 16 outputs of the MTV16 were buffered and connected to 16 jack sockets.
Additional controls (momentary button, LED, rotary switch) had been added compared to the MTV16.

Early last year Doepfer gave up the idea to built the A-190-5 on base of the MTV16.

The new A-190-5 is now a completely redesigned version that contains an LC display (similar to the A-187-1), some control buttons, a USB interface and higher resolution DACs with higher voltage range (probably 12 bit and 0...+10V).
It will have 12 CV and 4 Gate outputs, different modes (e.g. unisono, four-fold monophonic or polyphonic, and different four voice polyphonic modes)

For each voice a pitch control voltage (CV1, 1V/octave standard to control VCOs), a gate output (to control envelope generators) and two additional control voltages (CV2, CV3) are available. The two additional CV outputs can be controlled by Midi velocity, volume, modulation, pitch bend, after touch or free assignable Midi controllers.

Doepfer A-190-5 Final Prototype

The basic modes can selected by means of a momentary switch (probably Mode or Algor.) and is shown in the LC display.
Certain parameters of each mode can be edited (e.g. the midi channel(s), the midi reference note for 0V CV, assigned controllers for CV2 and CV3).
For this the momentary switch Edit/Play is used.
The parameter values (e.g. midi channels) are shown in the display and can be modified by means of the momentary switches 1...4.
In Play mode the LEDs of these four switches display the gate states.

The range of the CV outputs (CV1...CV3) is 0...+10V (i.e. 10 octaves for CV1). The resolution is 12 bit.
The gate voltages are 0/+5V (maybe even adjustable to 0...+10V for non A-100 applications).

The first version of the module will be available around fall 2013 at the price of approximately Euro 300.00* and will include the most important assign algorithms.
Updates and bug fixes can be installed by the customer via the USB interface.

Update September 1:
Dieter Doepfer: " The A-190-5 is still under development. The hardware (pc boards, frontpanel) is ready made but the firmware is not yet ready. But I hope we will release the A-190-5 still this year."

Source: Doepfer Website

*Price and release date are still without obligation !

Doepfer Pre-MusikMesse 2013 Announcements

Dieter Doepfer made a few announcements today about the upcoming new modules and about the MusikMesse 2013, that will be held from the 10th to the 13th of April 2013 in Frankfurt, Germany.

I'm looking most forward to the new A-157 Mini Schaltwerk prototypes, i cant wait until the are finished.:
Doepfer stated that they " ...will hopefully show the "large" version of the trigger sequencer A-157/miniature Schaltwerk (8 rows with 16 steps each).
The 8x16 button/LED board is ready but I cannot guarantee that the controller board will be also ready for the Musikmesse."

One of the earlier
A-190-5 prototypes

They will also show the prototype of the new version of the A-190-5 Polyphonic USB/Midi-to-CV/Gate Interface (with LCD) and the A-190-8 USB/Midi-to-Sync Interface at the Musikmesse in Frankfurt.

These modules will be available about summer 2013. 

The other news:

The small version of the multiple A-180 is available in April 2013 (2 HP only, name: A-180-2)

The module A-171-2 (licensed copy of the Serge/CGS VCS) will be available about end of April or early in May 2013.
(It will be interesting to see how the Serge's new deal with TipTop works out - expect a surge of Serge for your Eurorack this year /PP)

A-171-2 Serge
Slew Limiter
prototype

The re-designed A-130 (linear VCA) is now delivered with a precision VCA circuit (SSM2164) instead of the CA3080).
The new A-130 is DC-coupled.

The re-designed A-131 (exponential VCA) is now delivered also with an improved VCA circuit (high end THAT VCA circuit instead of the CA3080).
The new A-131 is also DC-coupled.

The A-135 will be available from about May 2013 in a revised version with DC coupling of the signals and single outputs, i.e. it can be used also as 4 separate linear VCAs with manual gain, CV in with attenuator and signal in with attenuator.
Because of the DC coupling it can be used also for modulation signal processing (i.e. voltage controlled mixing of control signals).

So, a lot of updates, can't wait to see the first pictures of the A-157 combo coming from MusikMesse.
Are you going to MusikMesse this year and want to contribute pictures to PatchPierre.Net?
Feel free to contact me via the comments, email or Twitter, thanks in advance!

Doepfer USB/CV/Gate/MIDI Converters Update

A little bit more info (by Dieter himself) on two upcoming Doepfer modules popped up in the Yahoo Doepfer Usergroup today.

It said that the A-192-2 Dual CV/Gate-to-MIDI/USB Interface is in the starting blocks and will be included with the next (fall 2012) production series.
Module A-192-2 contains two independent CV/Gate-to-Midi/USB interfaces.
Another product that almost reached the production stage is the A-190-5 four voice polyphonic Midi to CV/Gate interface that will probably be included in the last production series in 2012.

The A-190-5 will have 12 CV and 4 Gate outputs, and different modes (e.g. unisono, four-fold monophonic, different four voice polyphonic modes)
The hardware of the A-190-5 module is ready and Christian is working on the firmware.
Though it was planned to use 12 bit DA converters Doepfer thinks about 8 bit converters to reduce the price a bit.
"12 bit converters don't seem to have any advantage because the module only converts 7 bit midi data into CV (no software LFOs or software envelopes or software glide) and in this case 12 bit DACs

are wasted money because the last 5 bits are not used.", according to Dieter.

The estimated price for the A-192-2 is approximately 130 Euro, expect to pay around 300 Euro for the A-190-5.
Price and release date are still without obligation

Find the latest updates on new Doepfer modules HERE

Future Modules Update

Last week, Dieter Doepfer took the time to answer some questions in the Yahoo Doepfer A-100 Usergroup on the state of the new modules that will be released this year. I did mention most of them earlier, so no big news this time, but some really informative background info.

About the A-190-5 (four voice polyphonic Midi to CV/Gate interface):
" The new A-190-5 prototype (version with LC display) is on my table since a couple of months. But we did not continue because of some more important projects (e.g. Dark Time, Dark Energy II). I think we will be able to finish the hardware until summer (end of summer is in September :-) but I don't think that the final firmware with all planned modes will ready at that time. But we plan to add the firmware update feature via the USB interface."

Doepfer A-157 Trigger Sequencer, as shown at
MusikMesse 2012. Picture by @Cymatics

A-157 Trigger Sequencer -update:
" We are working on the A-157 right now. The new button/LED board with 16x8 is already made and tested. But we are about to redesign the control board as we determined that the microcontroller used in the first prototype (the pictures with the 8x8 board) is not powerful enough for all planned features. In addition the manufacturer announced the discontinuation of the chip. So it will still take some time until the module is ready."

He continued:
" I hope that these 3 new modules will available during this year: A-192-2 /CV/Gate-to-Midi/USB converter), A-190-5 (polyphonic USB/Midi-to-CV/Gate interface), A-157-1 (16x8 LED/button board with 8 trigger outputs), A-157-2 (control board #1 for A-157-1).
But I'm not sure about the order of the release dates.
Probably the A-192-2 will be the first one as the development is nearly finished (we have to built one more prototype and hope it will be the last one).

We (also) think about a "real" ASR (analog shift register) module because the A-152 cannot be used as ASR in all applications.
But this has no priority at the moment and is not yet mentioned in our list of planned modules."

Note: Please don't call or mail them too often at Doepfer about release-dates or updates of future modules. The Doepfer website is updated very regularly, so you will find all the latest info THERE...

MusikMesse 2012 - Alex4 Booth

This year you will find Doepfer products at the MusikMesse (in Frankfurt/ Germany), that started today, in hall 5.1 at booth D86 of their new distribution partner Alex4.

Alex4 is Doepfer's latest partner that aims to "collect regular products and innovations from smallest manufacturers in Europe, the USA or elsewhere to promote and sell them with specialized retail partners over europe fulfilling all european regulations while trying best to go a „green“ way wherever this could be possible."

They also distribute other (small) analog synthesizer brands like Alyseum, Cwejman, Flame, Kenton, Manikin, MFB, MIDI Solutions, Moon Modular, OTO Machines, Sherman SND, Studio Electronics, Vermona and WMD, so they have a very exciting booth at the MusikMesse

Dark Energy II working prototype,
as shown at MusikMesse 2012

A big A-100-System is on exhibit, and the first working prototype of the Dark Energy II is shown at the booth.
Dieter Doepfer was also there today to tell more about their latest products.

Besides the Dark Energy redesign you could also see the A-157 Trigger Sequencer (or so-called 'Mini Schaltwerk') again, although it is still the same version that was shown 2 years ago at NAMM 2010.

The current state of the A-157 is that the new pcb with 8x16 buttons and LEDs is already made and that Doepfer is about to develop the controller board. There is no release date available yet.

Other newsworthy bit was that the Dark Energy 1 will probably return, because the chipmaker that made the CEM3394 chip has promised to start making those chips again. No (re-)release date yet, but i personally don't expect the return of the DE1 this year...

Most of Doepfer's OEM products, the USB/Midi-to-CV/Sync interfaces and the master keyboards were also shown, and loads of other cool hardware from the other brands.

MusikMesse still lasts until March 24...
More info at
http://musik.messefrankfurt.com/frankfurt/en/besucher/willkommen.html

Many thanks to 'special reporter' at MusikMesse:

@Leonathorst from http://leonathorst.tumblr.com/

Most Wanted - Future Modules Update

It is always good to keep an eye on the posts from the Doepfer Yahoo Usergroup.
Not only to get answer to all the A-100 questions you have, the DIY-tips, and the interesting module discussions but also for Dieter Doepfer's own input, troubleshooting and the occasional company updates.
In one of his latest posts he announced a few interesting 'new' things on Doepfer's to-do list, including a few that are not yet on Doepfer's Future Module page.

The ones you can already find on that page are the A-190-5 polyphonic USB/Midi-to-CV/Gate interface, the A-142-4 Quad Decay, A-195-1 Pitch-to-CV/Midi/USB interface, A-192-2 CV/Gate to Midi interface, A-143-4 Quad VCO/VCLFO and the A-100 touch keyboard.

The original A-126(-1)

I already blogged about the forthcoming A-157 Trigger Sequencer (not much info on the Doepfer site, only in a NAMM 2010 brochure), but the update of the A-126 module was new for me.
The A-126-2 Frequency Shifter II will be a redesign of the old module. 

Because of availability of the special circuit CEM3382 used in the original module's internal quadrature VCO, the 'original' A-126 is no longer available and they had to stop the production of this module. 

It looks like Doepfer is now working hard on a succeeding model without an internal VCO.

Other modules that were mentioned were a VC Slope Generator ( no specs or further info available, but maybe something like the Serge Universal Slope Generator ?- i'm only guessing !), a Master Clock module/synced LFO, the A-100 bus board V2 with some Analoge Systems connectors ( no more Analogue Systems-to-Doepfer adaptors necessary? ), and an A-100 miniature power supply redesign 

Besides that, Dieter posted that they are also still working on various non-A-100 Doepfer products like the Dark Matter (Dark Energy expander with Noise, S&H, a second VCO, Multimode-VCF, additional waveforms and maybe some other effects), the Dark Link, and an expansion board for the DIY Synth. 

" ... still on our to-do list. But I can't say in which sequence the planned products will be released."

Note: Please don't call or mail them too often at Doepfer about release-dates or updates of future modules. The Doepfer website is updated very regularly, so you will find all the latest info there...

Controlling the A-100 via MIDI

In the beginning it was not difficult to pick a Doepfer MIDI-CV interface for your A-100 system.
The A-190 MIDI-CV/SYNC Interface was the only one available and there were not many other options.  (the A-191 MIDI-to-CV Interface / Shepard Generator was way more complex, i will discuss it in a future blogpost).
The A-190 is a powerful module that not only provides a few CV and Gate outputs, but also Portamento, Scale-settings, Pitch-bend, Glide, Clock and Reset signals, has a built-in (software) LFO and very flexible programmability.
Without a proper display it is quite awkward to program, but you'll quickly learn how to read the combinations of burning and flashing LEDs.
I do miss some further (software) development for this module. The arpeggio function, mentioned on the front-plate isn't even implemented (!)

A cheaper option that you can buy nowadays is the  A-190-2 Midi CV/Gate interface, which is based on the Doepfer MCV4. Only some minor changes were made for a better adaption to the A-100 system, e.g. five 3.5 mm sockets and zero-symmetrical CV for pitch bend, to be able to adjust the pitch bend range e.g. in combination with the precision CV adder A-185-2 and the glide function.
The module has no MIDI Thru and MIDI clock and reset functions though.

The new A-190-3 USB/MIDI-to-CV/Gate Interface that is in production stage has almost the same possibilities, but will be a modular version of Doepfer's upcoming Dark Link Module. This one will support USB and the release date for it is set for early 2011.
Another advantage of these two cheaper modules is that they don't need the additional +5V adapter. 

If you are looking for a polyphonic MIDI-CV contoller you will probably have to wait a while. Doepfer is busy working on the A-190-5, but it will be completely redesigned this year. A final version will  probably contain an LC display (similar to the A-187-1), some control buttons, a USB interface and higher resolution DACs with higher voltage range (probably 12 bit and 0...+10V). It will be a four voice polyphonic Midi to CV/Gate interface with 12 CV and 4 Gate outputs and different modes (e.g. unisono, four-fold monophonic, different four voice polyphonic modes.)

Tip: The monophonic MIDI-CV converters can write and read to the A-100 Busboard, more info on this HERE