 |
| A-106-5 SEM Filter Special Edition |
module.
The filter is equipped with a band pass output and a combined low/notch/high pass output.
For this output a control knob defines the relation between low and high pass signal.
If both signals appear at the same level (i.e. middle position of the Mix knob) one obtains a notch filter. Otherwise the low or high pass signal predominates.
The module does not feature self oscillation in contrast to most of the other filters of the A-100 system.
The module generates a distorted audio signal if the level control is set to about 50% (i.e. center position) or more with A-100 standard signals like VCOs.
Inputs: Audio In, CV1 In without attenuator, CV2 In with Polarizer
Outputs: Bandpass Out, Low/Highpass Mix-Out
Controls: Audio Attenuator, CV2 Polarizer, Frequency, Resonance, LP/HP Mix
Inputs: Audio In, CV1 In without attenuator, CV2 In with Polarizer
Outputs: Bandpass Out, Low/Highpass Mix-Out
Controls: Audio Attenuator, CV2 Polarizer, Frequency, Resonance, LP/HP Mix
You can find my review of the original A-106-5 module HERE,
and find all additional info/demos/etc on the A-106-5 on PatchPierre.Net via http://patchpierre.blogspot.nl/search/label/A-106-5
Doepfer A-106-5 Filter Demo (August 2012, by PatchPierre)
" Short Doepfer A-106-5 Demo by NetPierre
Starts with a sequenced bassline, generated by my Doepfer MAQ16/3 and Doepfer VCO A-110 (saw wave)
Bandpass Mode first, LP/HP later
A-118 Random voltages added to VC2 input somewhere in the middle.
Drums provided by an Elektron Machinedrum"
Doepfer A-106-5 Filter Demo (August 2012, by PatchPierre)
" Short Doepfer A-106-5 Demo by NetPierre
Starts with a sequenced bassline, generated by my Doepfer MAQ16/3 and Doepfer VCO A-110 (saw wave)
Bandpass Mode first, LP/HP later
A-118 Random voltages added to VC2 input somewhere in the middle.
Drums provided by an Elektron Machinedrum"
The module will be available in spring 2016
Source: Doepfer.com
