Skip to main content

Let me show you my rack... by @Flixxx

Felix from Germany (@Flixxx) was asked to make a video of the Eurorack gear that he uses to make his music and videos.
Here's his narrated studio-tour...
Don't forget to check out the other links below the video for more interesting stuff.

Video: Let me show you my rack ...
" I was asked to show my Eurorack. Here you go.
Please show me your's and subscribe for more videos: http://www.youtube.com/subscription_c...
If you have any questions, post them as a comment below :) Thanks for watching!

____MY EURORACK MODULAR SYNTH ON MODULARGRID.COM:
http://www.modulargrid.net/e/racks/vi...
____MY WHOLE SETUP EXPLAINED:
http://www.youtube.com/watch?v=L7yb2r...
____MY OTHER EURORACK VIDEOS:
Doepfer Clock Divider as Sub-Oscillator:
http://www.youtube.com/watch?v=p5FnhF...
Make Noise Function as Sub-Oscillator:
http://www.youtube.com/watch?v=jKtQ-_...
Turing Machine as VCO:
http://www.youtube.com/watch?v=uoNGHV...
Circuit Abbey Invy as Waveshaper:
http://www.youtube.com/watch?v=FCr5xn...
Intellijel uVCF as Saw Wave Oscillators:
http://www.youtube.com/watch?v=_e92Yi...
____LeBEAT GRAPHIC DESIGN (who painted my case):
http://lebeat.de/

____TIMECODES FOR EACH MODULE:

1:03 Doepfer A-160 Clock Divider & A-161 Clock Sequencer
1:31 Rebel Technologies Stoicheia
1:54 Doepfer A-162 Dual Trigger Delay
2:02 DIY OR Gate based on Doepfer DIY Page (http://www.doepfer.de/DIY/a100_diy.htm)
2:29 Doepfer A-151 Quad Sequential Switch
2:50 Doepfer A-180 Passive Multiples
3:07 Make Noise Function
3:25 Doepfer A-142-4 Quad Decay
3:36 Doepfer A-132-2 Dual Lin/Exp VCA
3:46 Doepfer A-132-4 Quad Exp VCA
3:58 Doepfer A-138 Exp Mixer
4:13 Din Sync Modseq
4:39 Music Thing Turing Machine & Pulses Expander
5:06 Doepfer A-175 Dual Voltage Inverter
5:17 Circuit Abbey Invy Attenuverter
5:37 Intellijel uScale Quantizer
5:50 Intellijel Dixie I VCO
6:09 Noise Engineering Ataraxic Translatron VCO
6:28 Intellijel uVCF
6:46 Doepfer A-125 Voltage Controlled Phase Shifter (Phaser)
6:55 Flame FX6
7:07 Flight of Harmony Plague Bearer v4
7:22 Flight of Harmony The Sound of Shadows Delay
7:45 Manhatten Analog mix
7:58 DIY Quad CV/Gate Generator
8:29 DIY Switch It/Push It
8:53 Doepfer A-183-1 Dual Attenuator
9:07 The Voice Of Saturn VCF
9:27 MFB OSC-02 Triple VCO
9:48 Monotron Blind Panel
9:57 Koma Kommander
10:23 Anyware Tinysizer Modular Synth

____MORE LINKS:
SUBSCRIBE TO MY CHANNEL:
http://www.youtube.com/subscription_c...
GET MY ELECTRONIC MUSIC AT BANDCAMP:
http://nightmachines.bandcamp.com
FOLLOW ME ON TWITTER:
http://twitter.com/Flixxx
MY OTHER YOUTUBE CHANNEL:
http://www.youtube.com/flx04part2 "

Popular posts from this blog

DIY Modular Case Ideas

There are many ways to house your (eurorack) modular synth, i wrote about the pre-manufactured options from Doepfer earlier, find that post HERE, but of course you can also try to build you own case.
There are many ways to make your own A-100/Eurorack case if you start out with just the basic rails and busboard, and you can make it as cheap or expensive as you can.

Check out a few ideas;
Wooden cabinets and side-panels are still very popular amongst (modular) synth enthusiasts.
These simple case standards for the pre-manufactured LC9 cases are very simple, and can be sooo useful
http://synthesizerart.blogspot.com/2011/10/dual-doepfer-lc9-case-stand-v1-design.html Also check out the other great modular pictures on his site.
Matthew Goike (@Goiks) also has some nice wooden cabinets on display and for sale on his website: http://www.goike.com/node/5

...or do what Stretta did (or rather what his brother did), make a high-end wood/brushed aluminium cabinet with integrated LED-lights and some …

Doepfer A-150-8 Octal Manual/Voltage Controlled Programmable Switches Announced

Doepfer has just released some info on their new modules for NAMM 2017 (19-21 jan.) Besides some vintage editions of existing modules, the A-135ABC VC Performance mixer modules, the A-110-6Trapezoid Thru Zero Quadrature VCO and a new A-100LC1 case (economically priced small housing with 48 HP width) there was also one other interesting new module announcement:
Module A-150-8 contains eight manually/voltage controlled switches.  Each of the eight switches has a manual control button (Man.), a control voltage input (CV), a common Out / Input (O/I), and two In / Outputs (I/O1, I/O2).  The switches are bi-directional, i.e. they can work in both directions, so can connect one input to either of two outputs, or either of two inputs to one output. 
Two LEDs show which in / output is active (ie. which is connected to the common out / input).  In addition the LEDs are used for the programming of the module: For each unit the operating mode can be selected:  Toggle or Level controlled. In Toggl…

Happy New Year From PatchPierre

Hi there, it's me again... Happy New Year!

You might have noticed that I havent posted a lot in the last 2 years...
It's been a rough time for me since the sudden loss of two parents within a relatively short time-span and I really needed some time to get myself together... to set things straight, finding myself and selecting priorities... even my regular work suffered from this breakdown.

It took a while to understand it all, and to get a better grip on it, and it's sometimes still not very clear.
I think I have found a way to cope with most of it now... although the slight autism that I have (ADD-like) doesn't make it easy for, especially in crowds with lots of people I don't know...
On my journey I also (re-)discovered the beautiful woman that has always lived inside of me and that i need to accept and cherish... more on that maybe later... I'm not considering changing the name of the blog to PatchPetra.Net 😇 (...yet), but you might spot me somewhere at mod…