Random Video: Modular Carousel by diafragma365

I found this one on YouTube....

Video: Modular Carousel by diafragma365

" An unprocessed recording of a rather simple but musical patch on my eurorack.
It started as a test of the Scale Select Mode of the Intellijel μScale II, with the Make Noise Pressure Points & Brains used to step through a simple sequence of eight chords.

A Make Noise Maths in combination with a Doepfer S&H were used as a random arpeggiator for the organ-like sound from the Synthesis Technology Morphing Terrarium, going through the E440 VCF to the Make Noise Echophon and Erbe-Verb in order to create some room around the sound.

The rhythm for the “organ” arpeggios is somehow randomized by applying a randomized Ginkosynthese TTLFO multiplication function to a tempo from the ALM Pamela’s Workout, the basic tempo engine for this patch.

While the bass kick sound is a straight 4/4, the hi hat is triggered by a patch on the 4MS QCD, partially controlled per measure by the Make Noise Pressure Points and Brains.

This patch was a nice experiment for me to introduce some randomness in a limited musical framework of eight chords and the sound reminds me of the organ going mad with its short notes on the carousel on the fair where I used to go as a child."

Uploaded by diafragma365

Monome Meadowphysics

Monome just released the Meadowphysics rhizomatic cascading counter, a grid-enabled module for the eurorack platform.

Monome Meadowphysics

" Meadowphysics facilitates the exploration of polyrhythms and rule-based sequencing, producing a
wide range of emergent patterns.
A monome grid is plugged into the front panel of the module, serving as a complete interface.
Tthe procedure continues running when the grid is disconnected, facilitating both live performance and precomposed playback of generative systems.

As the second module in the grid-based eurorack series, this module highlights the ability to swap the grid between modules rapidly, patching the usb cable much like a 3.5mm cable.
This module can be used in conjunction with white whale using a single grid gracefully.
The foundation of meadowphysics is an incoming clock which can be internal or external.
Seven additional counters can be cross-assigned with this clock to count down an assignable number of counts, which is the primary interface on the grid. when a counter reaches zero, the corresponding output is triggered on the panel.
Given a flexible assignment method, very complicated long-form mutating polyrhythms can be created intuitively.

In addition a series of “rules” can be applied at the zero count of each counter.
The count length can be reassigned– incremented/decremented, randomized, reset to last value, etc. a counter can have a rule assigned to change another counter’s behavior. In this way long evolving patterns emerge.
Very simple falling rhythms can also be accomplished in a very straightforward manner.
A standard subdivided counter runs as a default behavior.
Configurations are preset-able and savable to flash for later recall and instant resume on power-up."

Video: Meadowphysics possibilities
meadowphysics possibilities from tehn on Vimeo.

Video : Meadowphysics Tutorial
meadowphysics tutorial from tehn on Vimeo.

Medic Modules Cranial Saw - Advanced VCO / SUB Eurorack Module Demo by Rezfilter

Medic Modules Cranial Saw Eurorack Module

rezfilter made a nice video demonstrating the features of the 38HP wide Medic Modules Cranial Saw.
The Cranial Saw is a dual VCO
with Glide, Sync, Sub Oscillator, Pulse Width Modulation, Mixer and Cross Modulator.

" It features two discrete component VCOs based on early 1970s circuits so they sound very vintage and are full of character.

The dual VCO performs best in mid to low range, and combined with the Sub-Osc, produces huge, powerful sounds.
The main pitch CV input goes through a Glide / portamento circuit.
There are modulation CV inputs with attenuators. Also, VCO2 has its own CV Mod input.
Each VCO has a Pulse Width slider and PWM CV input sockets.
The VCOs also have Sync.

Cross modulation is possible by taking the output of say VCO1 and patching this to VCO2’s Mod CV input.
The built in mixer allows the two VCOs and the Sub-Osc to be mixed via their own attenuators.

The mixer has its own audio output of course, but the VCOs and Sub-Osc also have pre-mixer, fixed level individual outputs.
The two VCOs each can be switched between Saw or Square waveforms.

VCO1 can be set to ‘Freerun’.

This means it will not track the incoming pitch CV.
VCO1 can be disconnected from the Glide circuit.
Features such as Freerun, and the Glide disconnect of VCO1, as well as individual Mod CV for VCO2, allow a great range of sounds and weird effects to be produced when cross mod is patched, or Sync used.

A lot of thought has been put into all this. Please take a look at the videos on Analogue Solutions web site and YouTube channel for examples. The idea is to allow production of a wide range of VCO sound effects with the minimum amount of patched, though, of course, patching can be done.
All sliders incorporate a LED in their shafts. The Tune slider will flash in accordance to the pitch of VCO1."

More info via http://analoguesolutions.org.uk/medicmodules/wp/

Video: Medic Modules Cranial Saw - Advanced VCO / SUB Eurorack Module

" The Cranial Saw is an advanced VCO / SUB eurorack module with glide, featuring a whole range of flexible modulation possibilities to appease even the most demanding musicians and euro enthusiasts."

Uploaded by rezfilter

WMD Geiger Counter Eurorack In-Depth Overview

This WMD video appeared on YouTube yesterday.

It gives a nice overview of the WMD Geigercounter Eurorack module.

The Geigercounter is  wavetable distortion/ bit depth and sample rate reducer...

WMD Geigercounter Eurorack module

" The WMD Geiger Counter is hundreds of entirely new face melting sounds.
A high gain modern preamp drives an 8 bit computer, creating sounds which range from nice (tubey overdrive, lofi aliasing, hot gated leads) to total madness (impossible amounts of gain, multiple octave foldover, harsh digital data errors, and piercing sculpted noise)."

Features:
- High Gain Modern Preamp
- Preamp Attenuator
- Direct Input
- Dramatic Tone Control with Disable
- Sample Rate from 260Hz to 200kHz
- 1 to 8 Bit Depth with Mask mode
- 252 Wave Table Modulator
- CV of Sample Rate
- CV of Bit Depth
- CV of Wave Table
- Always saves settings
- Top Quality Components
- Anodized and epoxy screen printed
- Standard 10pin Eurorack Cable
- 10 HP

Video:
WMD - Geiger Counter In-Depth Overview

" Alex takes us throught the features and functions of the WMD Geiger Counter Eurorack Module."

Uploaded by William Mathewson (of WMD)

Hinton Instruments Gearbox

Hinton Instruments was quite an unknown name for me up until now, but they have been releasing a few highly interesting modules lately.
The Gearbox is one of them.

Hinton Instruments Gearbox. Basic version on the left,
full version with DIN panel on the right

This module was developed in response to a request on the Muffwiggler forum.
( The full thread discussion may be read here )

The Gearbox is a compact module that converts and locks analogue, MIDI and DINSync timing clocks together.
Any one source may be master and the other two follow in synchronisation.

The Gearbox module is available in two versions: a basic 8HP module with a single 5-pin DIN socket that may be used as one input or output or a full version with manual transport control switches and a separate 6HP panel containing four DIN I/O connectors.

Main Features:
- Four analogue inputs: Clock, Pause, Start and Stop
- Five analogue clock pulse outputs, 5V or 10V levels set by links:
- Reset, ÷6, ÷8, ÷12, ÷24 clocks
- Manual illuminated switches: Start and Stop/Cont
- MIDI In and Out
- DIN-Sync In and Out
- 8HP width with mini-jack (EJ), Banana 4mm (EB) or Bantam/TT 4.4mm (ET) jacks
- 120mm deep.
- 6HP width panel for DIN connectors, may be placed away from main panel.

Any analogue signals may be used as inputs enabling slow rising waveforms to be used as jitter free controls.
MIDI and DINSync sequencers and drum machines and DAWs may be controlled by analogue signals and vice versa.
Analogue sequencers may be driven by MIDI or DINSync clocks and commands.

Because all timing is divided down rather than multiplied up there is no sloppy timing with tempo changes.

 More details and specifications at http://hinton-instruments.co.uk/paprod/modular/gearbox/specifications.htm

These Hopeful Machines Radio Documentary Re-Run and Expanded website

Almost a year ago i posted about a wonderful radio-documentary 'These Hopeful Machines', a New-Zealand electronic music -documentary that was broadcasted earlier that year during the Sound Lounge radio-programme...

Now their expanded website is online, and the programme will be aired again...
 Here is the email that i got from producer James Gardner today...

" Hi Pierre
I hope this message finds you well.
I'm please to say that at long last, (it's only taken about a year...) the expanded website for my series 'These Hopeful Machines' is now up and running here:
<http://www.radionz.co.nz/concert/programmes/hopefulmachines>

There are full listings of all the music played in the series, links and a bibliography as well as interview transcripts - starting here:
<http://www.radionz.co.nz/concert/programmes/hopefulmachines/20130910>
and outtakes here:
<http://www.radionz.co.nz/concert/programmes/hopefulmachines/20130907>

Because of Radio New Zealand's house website style, some of the pages are very long, so you will need to do a lot of scrolling down to see all of the content!
I'd be very grateful if you'd post this news on your PatchPierre blog, and please feel free to spread the word via social media.

In case you have some New Zealand readers, they may like to know that the series is being broadcast (and streamed) again, this time on Radio New Zealand National (not Concert) on Fridays at 11pm, during 'Nights with Bryan Crump'. So that should get it to a slightly bigger real-time audience...

In the meantime, I wish you all the very best
Cheers
Jim"

ZAelectronic Cyclops II Demos by miip999

miip999 uploaded two videos featuring the Zetangas ZAelectronic Cyclops II light controlled delay module.
Zetangas ZAelectronic is formerly known as Zebranalogic before 2009
The cyclops II is the improved version of the earlier cyclops I, and has been implemented with a mayor control of the LFO, with three controls:

Speed: Controls the velocity level of the LFO oscillator, varying the intensity of the frequency.
Wave form: Controls the waveform, according to the variation the wave transforms from square to triangular or vice versa by turning the knob.
Depth: Determines the depth level. This control determines the amount of light transmitted from the stick to change the sound of the Cyclops 2.

The Cyclops 2 has two additional controls:
Feedback: Controls the feedback level of your sound
Warning!!!!! Setting this control to its max can create an uncontrollable feedback sound.
Level: determines the sound level of the effect, in relation to a clean guitar.

In the first video miip999 explains the main functions of this module, and in the other video he performs a six and a half minute long soundscape including the CyclopsII module...

Video: Cyclops II Eurorack Verison by Zetangas ZAelectronics

" Overview over Cyclops II Eurorack Verison by Zetangas ZAelectronics.
Cyclops II is a Light controlled delay for eurorack modular synthesizer

Controls:
Delay: Delay Level, Feedback,
Envelope: Depht, Attack 10ms-5s, Decay 10ms-10s,
Eye (delay sensor): Light input 0 - +10v.max

Technical details:
Input impedance 2,2Mohm
output 470 ohm
Current consumption 100mA
Usable with gate and trigger.
Delay time apron. 342ms"

Video 2: Cyclops delay eurorack

" first glimpse of Zetangas Cyclops Eurorack module.
Cyclops is a light controlled delay, there will be more clips with cyclops soon..."

Uploaded by miip999

More info: www.zaelectronic.com www.zebranalogic.com

Night of the Modular Monsters, September 19 2014, Leiden (NL)

Last night I went out to see a few modular synth-based acts in The Generator at Vrijplaats Middelstegracht in Leiden (NL) at the 'Night of the Modular Monsters'.
(Check out the event on Facebook)
In an intimate setting; a theatre-style room with comfortable cinema-seats, a big screen with cool visuals three live-acts were performing for a group of around 50 visitors...

OR Combiner, a duo consisting of Lama Waaien & Tony Dubshot (from http://www.dubbhism.com/) opened the evening with a dubby set, but sadly I missed their act because i was a bit late and the show had to start half an hour earlier.
Luckily they recorded it, and you can find it at https://soundcloud.com/ism-studio/night-of-the-modular-monsters

Falafel Biels in action at Night of the Modular Monsters

'Freepatcher' Falafel Biels from Rotterdam did a nice 40-minute long non-stop noisy/atmospheric set.
He plays at these kind of events quite often and also designs his own line of Monster Modules.
After the show he showed me a few of his creations, including his 'Bunch-a-clox', a few interesting clock divider modules and other Falufar-branded modules.
Find more on his Facebook page.

Falafel Biels' live setup

Das Ding from Rotterdam closed the evening with an electro-set.
Danny Bosten a.k.a. Das Ding has been creating powerful dark electro since back in the early 1980s, releasing his music and friends’ music via his own cassette label called Tear Apart Tapes.

He told me that he had recently begun to build his own Eurorack-compatible mini-sequencer.

It's called the Baby 8 and if you're interested you can buy a hand built version (stand-alone or rack) directly from Danny. Just contact him via Facebook.

Check out this Juno Plus interview about the Baby 8 for more info.

Das Ding live setup, Eurorack, TR-606 and MC-202,
 and two of his Baby8 sequencers

The stage after the shows

Overall I did have a nice and relaxed evening.

I liked the venue, and it seems perfect for these kind of occasions.

This is the first time i really went out and met some of the interesting people from the Dutch Modular scene.

I did have to leave a bit early because my weekend-schedule is always very full, but i hope i can take more time next time.

I hope to write some more party-reports on PatchPierre.Net in the future, and maybe do some interviews with all these interesting people...

Main info via Dubbhism:

http://www.dubbhism.com/2014/08/night-of-modular-monsters_30.html

More pictures at https://www.facebook.com/media/set/?set=a.675944072501136.1073741845.271419252953622&type=1

Gezeiten Modular Ultima Ratio TYP1 Cascading Clock

Another newcomer in the Eurorack-scene is Gezeiten Modular, a Berlin based manufacturer of Eurorack compatible Synthesizer Modules. (Gezeiten means Tides in German)

The Ultima Ratio Cascading Clock is the first product they recently released in a small series.

Gezeiten Ultima Ratio
TYP1 Cascading Clock

The Gezeiten Ultima Ratio is an 8HP wide intuitive playable Clock Divider, Clock Generator and Dual AR Envelope.

You can use it
- to synchronize sequencers with independent time signatures
- as an performance like instrument when you play the divider ratios
- to provide and distribute a stable system clock
- to fire envelopes in a live performance to rhythmically control filters or VCAs in musically meaningful ratios
- to mult triggers

The Ultima Ratio is available at first in a small batch as a DIY kit.

Ordering info can be found at http://www.gezeiten-modular.com/pages/order_kit

Video: Dividing Clocks: Gezeiten Ultima Ratio Eurorack Module

"Playing along with my eurorack modular synthesizer and testing the Gezeiten Ultima Ratio clock divider module.
The track is entirely made with the modular with just the inevitable addition of reverb :)
The Ultima Ratio is used to provide 3 clock streams to synchronize the Grids drum sequencer and both Moskwa sequencers with different clock resolutions.
I play with the clock ratios in realtime and also make use of the makro attack/release envelope generator to provide control voltage to modulate the cutoff frequency of a dual Korgasmatron filter.

http://www.gezeiten-modular.com/
http://www.modulargrid.net/e/gezeiten..."

via ModularGrid

Qu-Bit Electronix RT60 DSP Multi-FX

Qu-Bit Electronix (known from their debut Eurorack Nebulæ audio file player/granular oscillator) recently released a few new modules.

I will blog about the Nano Rand once i know a bit more... but first this...

QU-Bit RT60

The RT60 is an 8HP wide, skiff-friendly stereo multi-effects processor that features 7 high quality DSP effects running from the venerable Spin Semiconductor FV-1 chip. 

It sounds very impressive and the cool thing is that all parameters of this module can be controlled via CV, even the switching between effects.

Main Features:
- Wet/dry control
- Voltage control over ALL parameters.
- Stereo in/out
- 7 unique DSP effects including reverb, delay, flange, tremolo and pitch shift
- Dynamic switching of effects
- Power consumption: 70mA

Also check out the initial demo that bigcitymusic published today, find it at http://youtu.be/BeWFWqa1pDA

Video 1: RT60

More info at http://www.qubitelectronix.com/ 

Follow them on Twitter: https://twitter.com/qubitelectronix
,or on Facebook: https://www.facebook.com/qubitelectronix
and Instagram: http://instagram.com/qubitelectronix

Video uploaded by http://www.youtube.com/QuBitElectronix

Video 2:  Qu-Bit Electronix RT60 Audio Demo by ToothsVideo

" Qu-Bit Electronix RT60 Eurorack Module Audio Demo
A simple audio only demo of the Qu-Bit RT60's seven different effects. All effects have been recorded at the smallest and largest settings as well as minimum to fully wet so you'll be able to hear the tone and the subtleties/extremities of each of the 7 effects.
You will hear a bit of the dry patch before each effect is mixed in -
Verb 1 - 0:00
Verb 2 - 1:09
Chorus - 2:30
Tremolo - 3:39
Flanger - 4:40
Delay - 8:11
Pitch - 10:58

Patch info - Maths Envelope & Clock / Rene Sequence / AFG Oscillator, Sub + Alien Saw / STG Moog / Mixer / Doepfer A-132-2 VCA / no filter
Live modulation of effects, no CV used on the RT60. Used as the last module in the patch.

More info go here -
http://www.qubitelectronix.com/#!rt60...
http://www.Tooths.com.au
http://www.twitter.com/toothsau
http://www.facebook.com/tooths.com.au "

Uploaded by Toothsvideo

Video 3: RT60 Tutorial by Collin Russell

" This is a tutorial for the Qu-Bit Electronix RT60.
Table of Contents
Introduction: 0:00
Verb 1: 0:28
Verb 2: 1:19
Chorus: 2:05
Flange: 2:50
Tremolo: 3:35
Delay/Pitch Shift: 4:27
Pitch Shift: 5:23
Knob & CV Overview: 5:57
Effect Selection Modes: 6:18
www.collinrussellmusic.com
www.qubitelectronix.com"

Uploaded by Collin Russell Music