Random Video: Improvisation XXXII by Andreas Krebs:

Andreas Krebs, blogger at http://blog.andreaskrebs.de/ and writer of the Big A-100 Book (still only available in the German language) uploaded an impressive 26-minute long video of his latest improvisational piece... Enjoy!

Video: Andreas Krebs: Improvisation XXXII

"Andreas Krebs: Improvisation XXXII "Wind Horse" 20.02.2013
Instruments: Doepfer A-100, GForce ImpOSCar2 "

Find more about Andreas HERE

Doepfer Pre-MusikMesse 2013 Announcements

Dieter Doepfer made a few announcements today about the upcoming new modules and about the MusikMesse 2013, that will be held from the 10th to the 13th of April 2013 in Frankfurt, Germany.

I'm looking most forward to the new A-157 Mini Schaltwerk prototypes, i cant wait until the are finished.:
Doepfer stated that they " ...will hopefully show the "large" version of the trigger sequencer A-157/miniature Schaltwerk (8 rows with 16 steps each).
The 8x16 button/LED board is ready but I cannot guarantee that the controller board will be also ready for the Musikmesse."

One of the earlier
A-190-5 prototypes

They will also show the prototype of the new version of the A-190-5 Polyphonic USB/Midi-to-CV/Gate Interface (with LCD) and the A-190-8 USB/Midi-to-Sync Interface at the Musikmesse in Frankfurt.

These modules will be available about summer 2013. 

The other news:

The small version of the multiple A-180 is available in April 2013 (2 HP only, name: A-180-2)

The module A-171-2 (licensed copy of the Serge/CGS VCS) will be available about end of April or early in May 2013.
(It will be interesting to see how the Serge's new deal with TipTop works out - expect a surge of Serge for your Eurorack this year /PP)

A-171-2 Serge
Slew Limiter
prototype

The re-designed A-130 (linear VCA) is now delivered with a precision VCA circuit (SSM2164) instead of the CA3080).
The new A-130 is DC-coupled.

The re-designed A-131 (exponential VCA) is now delivered also with an improved VCA circuit (high end THAT VCA circuit instead of the CA3080).
The new A-131 is also DC-coupled.

The A-135 will be available from about May 2013 in a revised version with DC coupling of the signals and single outputs, i.e. it can be used also as 4 separate linear VCAs with manual gain, CV in with attenuator and signal in with attenuator.
Because of the DC coupling it can be used also for modulation signal processing (i.e. voltage controlled mixing of control signals).

So, a lot of updates, can't wait to see the first pictures of the A-157 combo coming from MusikMesse.
Are you going to MusikMesse this year and want to contribute pictures to PatchPierre.Net?
Feel free to contact me via the comments, email or Twitter, thanks in advance!

Doepfer DIY Synth for Eurorack

I have a lot of respect for the DIY/synth community and their inventivity.
A Google alert notified me about this module, a Doepfer DIY-synth built into a skiff-friendly 42 TE wide Eurorack panel... the smallest one i have seen so far.
For those of you interested, it is still for sale on eBay...


"Doepfer DIY synth for Eurorack format
Fully patchable complete modular analog synth.
Size 42TE (213 mm) / Skiff friendly

The module has:
30 Patch points (3,5 Euro standard jacks)
27 Potentiometers
plus 2 switches and 2 LEDs for ADSR and LFO

You get:
A VCO, Multimode filter (LowPass, HighPass and mixed mode), LFO (trangle and rectangle), ADSR, inverter, slew (portamento)
Each with several attennuators and parameters not normally seen in other modules."

Auction ends on the 15th of March - find it on eBay HERE

Alternative Controllers: Dmitry Shtatnov's Wob-Wob Fader

Dmitry Shtatnov uploaded a nice video from his latest DIY-project/invention.
He created a CV-source module that consists of an 8 HP front-panel with two faders, two separate mini-jack outputs and a switch.

Dmitry's Wob-Bob fader

The faders generate CV voltages, and each fader has its own output.
A switch is added to select between (regular) fader mode and so-called wob-wob mode with a 0V.-centre in the middle.
I must say it does create a nice effect, and IMO not only suitable for making Dub-Step...

Dmitry even shares the schemetics if you're interested in this project, contact him via his site or via YouTube.

Video: Wob-Wob Filter

" This short demonstration shows my little invention: CV-source dedicated for Dub-Step drops. Unlike regular fader, this one has its maximal value on the middle position. Schematics available. It's very simple and it's free for non-commercial use.
You can get schematic here: http://ic.pics.livejournal.com/rpocc/...
R2 and R3 can be replaced with 4.7k to increase the sweep width. http://rpocc.ru/"

Uploaded by rpocc

As an alternative you could also use the A-174-2 Modulation Wheels CV Source for this.

This module has 2 wheels, and comes standard as one spring loaded wheel with bipolar voltage output, and one wheel without spring with only positive voltage output as a standard.

For each wheel two jumpers are available: one for the voltage range (positive or bipolar) and one for the voltage plateau around 0 V.
Another option to re-create this effect would be with an A-174(-1) Joystick module...

Using a Doepfer A-145 LFO as Swing Generator

I have decided to make a few short tutorials for the blog with relatively basic tips for your modular synthesizer.

The first video in this series shows how you can use an LFO as alternative 'Swing Generator'
I used a Doepfer A-145 LFO to show the principle.
The A-145 can do a great job as a (continuous) envelope generator, especially when using the reversed saw-tooth wave.

In the video the TB-303 is playing, the A-100 is playing the same pattern via the TB-303's CV Output.
The Gate from the TB-303 is fed into the Reset In on the A-145 so each time this module receives a Gate signal, it starts a new cycle.
Slow LFO cycles (Low mode) will result in longer envelopes and faster LFO's will result in interesting (swinging) rhythmical discoveries.

Video: Using an A-145 LFO as Swing Generator by PatchPierre

" Short PatchPierre Tutorial
Equipment used: Doepfer A-100, Roland TB-303, Machinedrum "

Uploaded by PatchPierre (subscribe!)

Doepfer A-118 Extra Random Output Modification

A-118 front panel,
secured and ready
for drilling

In preparation for the next #ModularBattle round, i figured out i had to do something to get a little bit more out of my pretty basic set of Doepfer Modules.

I decided to add an extra Random Output to my A-118 Noise/Random Voltage module, which was quite an easy job.

After i removed the knobs and the sockets i could remove the frontpanel of the module.
I mounted it on a flat piece of (old)wood, and secured it with two nails to avoid the frontpanel slipping away.
With a nail and a hammer i punched a small guide-hole for my drill, and drilled an extra hole for the new mini-jack connector.

To protect the front-plate, you can use an adhesive foil or (painter's) masking tape to cover the front, but if you drill very carefully, and don't wipe but blow the aluminium-scrapes off the module you'll be fine.

A-118 extra random output wiring

The new mini-jack connector was one that i ordered from Doepfer earlier (i have a big collection of mini-jack connectors, knobs and switches - they sell them seperately as spare parts) and the connection with the other random output was made with 2 pieces of wire and my soldering-iron.
The connection was as easy as it looks, and it looks like my soldering-skills are (slightly) improving...

Finished module with
extra random output

Don'be afraid for any CV-loss now that the signal has to be distributed over the two Random busses.
Doepfer confirmed to me that "this just works as a mini multiple and doesn't lower the CV"

Now that the modification is done, the module sends 2 similar (controllable) random voltages to both outputs that i can use for all kinds of purposes throughout my modular synthesizer.

For a modification that was done in less than an hour, it is a nice improvement...

The mods described on this site will most likely void any warranty and, if not done carefully, can damage the circuit board, IC chips, and faceplates.

"The rules of fair play do not apply in love and war." John Lyly's 'Euphues' (1578) #ModularBattle

Gestural Control of Modular Synthesizer via Kinect by Robotmakers

A video by Robotmakers was uploaded to YouTube this weekend, showing another alternative way of controlling your modular with gestures.

Finally someone found out how to use the Microsoft Kinect system to control a (modular) synthesizer.

Kinect is a motion sensing input device by Microsoft for the Xbox 360 game console and Windows PCs, based around a webcam-style add-on peripheral. 

It enables users to control and interact with the PC or Xbox 360 without the need to touch a game controller or mouse, through a natural user interface using gestures.

Although this hack only converts the gestures to a MIDI signal, it can be easily converted into CV voltages with any simple MIDI-to-CV converter.

I predicted that this would be possible when the Kinect was announced in a post from January last year about Doepfer's Mogli glove. 

I didn't expect it would take this long before a video showing this would appear on YouTube though...

(or did i miss earlier attempts?)

Video: Gestural Control of Modular Synthesizer via Kinect

" Custom software enables gestural control using Kinect and PC. Hand movements in the X and Y axes are translated into MIDI signals which generate control voltages, allowing 2 dimensional morphing of waveforms in a "Morphing Terrarium" module, processed through modular moog.

Recorded in the superterranian lair of the Robotmakers. "

Uploaded by robotmakers

Also read the other blog-posts i wrote about touch-less gesture-control, like the Theremin, the Doepfer Mogli and the Wii-mote.