Skip to main content

Doepfer A-135-4A/B/C Voltage Controlled Performance Mixer Modules Announced


The A-135-4A and B prototypes on display
at the Amsterdam Dance Event in
October 2016
In a previous blogpost I was rather excited about my own new A-138p/o Performance mixer combo.
I bought i just right before I knew that Doepfer was working on a voltage controlled version of this module...

On first impression, the new A-135-4A Voltage Controlled Performance Mixer looks quite the same as the non-cv-controllable A-138p Performance Mixer, only with extra LEDs for displaying the incoming CV voltages for all parameters (except Gain).

Module A-135-4B is the CV-input module, where 16 different control voltages can alter 16 parameters on the A-135-4A Mixer... The modules must be connected via an int 20pin ribbon-cable.

Module A-135-4C is a four-fold envelope follower with adjustable attack and release time for each channel.
The main function of the module is to derive four envelopes from the A-135-4A audio input signals. These voltages can be used to control parameters of the main module A-135-4A via the CV input module A-135-4B2. Typical applications are ducking (e.i. the signal of one channel is used to mute another channel more or less), as well as compressor and expander functions.

A-135-4A/B/C VC Performance mixer prototype
with the A-138o Output module
A-135-4B CV Inputs Module close-up
The modules of the A-135-4 series can be combined with the (non voltage controlled) mixer modules A-138o/p so that these can be used as output module for the A-135-4A. A-135-4A and A-138p can be connected together to the same A-138o to obtain e.g. four fully voltage controlled channels (A-135-4A) and four manually controlled channels (A-138p).

This combo will probably available before spring of this year.

Source:
Preliminary info via http://www.doepfer.de/A1354.htm

Popular posts from this blog

DIY Modular Case Ideas

There are many ways to house your (eurorack) modular synth, i wrote about the pre-manufactured options from Doepfer earlier, find that post HERE, but of course you can also try to build you own case.
There are many ways to make your own A-100/Eurorack case if you start out with just the basic rails and busboard, and you can make it as cheap or expensive as you can.

Check out a few ideas;
Wooden cabinets and side-panels are still very popular amongst (modular) synth enthusiasts.
These simple case standards for the pre-manufactured LC9 cases are very simple, and can be sooo useful
http://synthesizerart.blogspot.com/2011/10/dual-doepfer-lc9-case-stand-v1-design.html Also check out the other great modular pictures on his site.
Matthew Goike (@Goiks) also has some nice wooden cabinets on display and for sale on his website: http://www.goike.com/node/5

...or do what Stretta did (or rather what his brother did), make a high-end wood/brushed aluminium cabinet with integrated LED-lights and some …

Doepfer A-150-8 Octal Manual/Voltage Controlled Programmable Switches Announced

Doepfer has just released some info on their new modules for NAMM 2017 (19-21 jan.) Besides some vintage editions of existing modules, the A-135ABC VC Performance mixer modules, the A-110-6Trapezoid Thru Zero Quadrature VCO and a new A-100LC1 case (economically priced small housing with 48 HP width) there was also one other interesting new module announcement:
Module A-150-8 contains eight manually/voltage controlled switches.  Each of the eight switches has a manual control button (Man.), a control voltage input (CV), a common Out / Input (O/I), and two In / Outputs (I/O1, I/O2).  The switches are bi-directional, i.e. they can work in both directions, so can connect one input to either of two outputs, or either of two inputs to one output. 
Two LEDs show which in / output is active (ie. which is connected to the common out / input).  In addition the LEDs are used for the programming of the module: For each unit the operating mode can be selected:  Toggle or Level controlled. In Toggl…

Happy New Year From PatchPierre

Hi there, it's me again... Happy New Year!

You might have noticed that I havent posted a lot in the last 2 years...
It's been a rough time for me since the sudden loss of two parents within a relatively short time-span and I really needed some time to get myself together... to set things straight, finding myself and selecting priorities... even my regular work suffered from this breakdown.

It took a while to understand it all, and to get a better grip on it, and it's sometimes still not very clear.
I think I have found a way to cope with most of it now... although the slight autism that I have (ADD-like) doesn't make it easy for, especially in crowds with lots of people I don't know...
On my journey I also (re-)discovered the beautiful woman that has always lived inside of me and that i need to accept and cherish... more on that maybe later... I'm not considering changing the name of the blog to PatchPetra.Net 😇 (...yet), but you might spot me somewhere at mod…